Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Hobe Sound
Door installation in Hobe Sound comes with a set of rules most contractors never explain until the permit comes back flagged. Because Hobe Sound is unincorporated Martin County, every door permit runs through the county building department under wind-borne debris code, not the HVHZ rules used just south in Palm Beach County. That changes what products qualify, how long approval takes, and what your quote should include. At TruePane Windows & Doors, we build that county-specific process into every estimate before the first cut of demo day. Call (772) 362-3326 to talk through your project with Dale Kessler and our Door Installation team.
Why TruePane Windows & Doors Is Hobe Sound’s Preferred Door Installation Company
We’ve worked enough homes between Southeast Osprey Street and the Hobe Sound village center to know what Martin County’s plan review desk asks for before they’ll stamp a door permit. Homeowners call us after a cheaper bid stalls in submittal because the product approval numbers don’t match the county’s wind-load table. We register both manufacturer warranty layers in writing on every job, state the durations on the paperwork, and back the workmanship with our Done Right Promise. No arguing, no fine print.
Homeowners in Hobe Sound consistently mention the same things after we finish: the technician measured twice, the quote showed Andersen and PGT side by side on paper, and the permit passed inspection on the first pass. Reviews from Hobe Sound customers point to our background-checked, uniformed technicians and the fact that a live person answers the phone at any hour. That’s not a regional call center. It’s our office, and we answer.
Response time to Hobe Sound is straightforward. Dispatch and scheduling are coordinated from our South Florida office, and our crews serve Hobe Sound directly. We’re not routing a truck from three counties away. When you call (772) 362-3326, you’ll get a straight answer about when we can be on your street, with a quote in hand.
Our Door Installation Services in Hobe Sound
Every door we install in Hobe Sound starts with the same question: what does the wind-borne debris code require for your opening, and does the product documentation back it up. Here’s what we typically work on across the area.
Entry & Swing Doors
The entry door on a Hobe Sound home is often the original hollow-core or single-panel aluminum unit from the 1970s or 80s. Those doors don’t carry an NOA or FL Product Approval number, which means they don’t pass Martin County’s current wind-load review. We replace them with full-frame impact-rated swing doors, fusion-welded frames, and marine-grade anodized aluminum or fiberglass that won’t seize from salt air off the Atlantic and the Indian River Lagoon. We handle the permit submittal and get the product approval documentation in order before demo day.
Double & French Doors
Double and French door replacements in Hobe Sound almost always require full-frame work on older concrete block homes. Insert-only retrofits rarely meet the wind-borne debris requirements for the county. We quote correct impact-rated multilock systems and reinforced sills, then register both warranty layers before the truck leaves. If you want to see the side-by-side manufacturer comparison on paper, we’ll lay it out for you.
Bifold & Folding Doors
Bifold and folding doors on Hobe Sound homes face the same salt-air and wind-load conditions as any other opening, but the hardware is the weak point. Non-marine-grade rollers and tracks corrode within a few seasons, especially on homes closer to the Intracoastal side of the corridor. We install stainless hardware and impact-rated panels with the product approval documentation Martin County requires for large openings. These are not the same as standard patio sliders, and the permit details matter.
Pivot Doors
Pivot doors are heavy-duty and make a statement, but they’re also one of the most commonly under-engineered installations we see in Hobe Sound. Some lower-end shops hang a massive pivot panel on a standard aluminum jamb and call it done. Martin County’s wind-load review will catch that. We engineer the subframe, specify stainless pivot hinges, and submit the NOA documentation that matches the door’s design pressure rating. It’s the difference between a door that passes inspection and one that gets red-tagged.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hobe Sound
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Hobe Sound’s salt-heavy air and wind-load requirements, we regularly recommend marine-grade anodized aluminum frames from PGT or ES Windows, and Andersen’s fiberglass options hold up well against corrosion on the swing door side. We maintain local parts inventory for common hardware repairs on these brands, which means a seized roller or worn weatherstripping on a Hobe Sound home doesn’t wait two weeks on a backorder. Tell us the brand on your existing door, and we’ll tell you honestly whether it’s worth repairing or replacing under the local code.
Common Door Installation Problems We See in Hobe Sound Homes
- Permit submittals rejected for missing NOA/FL Product Approval documentation. Homeowners sometimes hire a contractor who doesn’t realize Hobe Sound’s unincorporated status means every door permit goes through Martin County, where product approval numbers are scrutinized. The job stalls for weeks after demo. We submit complete documentation on the first pass because we’ve done enough of these to know exactly what the county reviewer checks.
- Insert-only replacements on pre-1992 concrete block homes. The original jalousie or louvered aluminum door frames on older Hobe Sound homes predate Florida’s post-Hurricane Andrew impact codes. A partial, insert-only retrofit won’t achieve compliance here. Full-frame impact-rated installation is the only path to a permitted, insured door.
- Salt-air corrosion seizing non-marine-grade hardware. Hobe Sound sits between the Atlantic and the Intracoastal Waterway, so doors get hit from both directions with salt spray. Standard steel hinges and rollers bind and seize within two or three seasons. That’s why we specify stainless-steel fasteners and marine-grade framing as standard, not as an upsell.
- Warranty paperwork never registered. Some installers leave the manufacturer warranty card in the box and walk away. On a Hobe Sound door that faces hurricane-force wind loads and double salt exposure, unregistered warranties mean a denied claim later. We register both warranty layers in writing and give you the durations on paper before we leave the driveway.
Pricing for Door Installation in Hobe Sound, FL
Here’s what we’re seeing in Hobe Sound right now for common door installation work. A standard single entry door with impact-rated full-frame replacement runs $1,800 to $3,400 depending on size, frame material, and glass package. Double or French door replacements start around $3,500 and range up to $6,500 for reinforced multilock systems. Bifold and folding door installations typically land between $4,000 and $8,000, driven by panel count and hardware grade. Pivot doors run higher, $5,500 to $10,000-plus once you factor the structural subframe and stainless hardware.
What moves the price in Hobe Sound specifically is the county’s permit review timeline. We include that scheduling buffer in our quotes upfront, so you’re not surprised when the job takes an extra week for Martin County approval. Every quote is free, line-item, and includes the permit documentation work. Call (772) 362-3326 for an exact number on your door.
We Also Serve Cities Near Hobe Sound
Our crews work throughout Martin County and the surrounding area. If you’re in Port Salerno, Stuart, Palm City, or Jensen Beach, you’ll get the same permitting expertise and the same Done Right Promise. We know the county review process applies across all these communities, and we build it into every quote. Learn more about Door Installation in Hobe Sound or call us directly for your area.
Serving Hobe Sound, FL - Our Local Coverage Area
We’re based in the Hobe Sound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Hobe Sound
Yes. Hobe Sound is unincorporated Martin County, so all door installation permits are issued exclusively by Martin County’s building department, not a municipal office. Impact-rated door submittals require full NOA or FL Product Approval documentation. We handle that paperwork as part of every installation. Call (772) 362-3326 to ask whether your specific door needs a permit, and we’ll give you an honest answer.
Your new entry door must meet Florida’s wind-borne debris region design pressures set by Martin County’s adopted code. That means impact-rated glazing and framing with a product approval number that matches the county’s wind-load table for your specific opening size. We quote the exact door that meets that rating for your home, with documentation included in the permit submittal.
Hobe Sound sits in a narrow corridor between the Atlantic Ocean and the Indian River Lagoon section of the Intracoastal Waterway. That geography means salt air hits door frames, hinges, and weatherstripping from two directions at once. Non-marine-grade aluminum and standard steel hardware corrode and seize within a few seasons. Marine-grade anodized aluminum or fiberglass frames with stainless fasteners are a practical necessity here, and that’s what we spec on every install.
Documented wind-load compliance is what your insurer looks for when you file a claim on a door damaged during a storm. If your door was installed without the proper product approval documentation on file with Martin County, the insurer can deny the claim on the basis of non-compliant construction. We register both manufacturer warranty layers and provide the NOA/FL Product Approval paperwork at the end of every job so your compliance is documented, not just claimed.
No. A standard storm door over an original jalousie frame will not meet Martin County’s wind-borne debris code requirements. The original jalousie door predates the post-Hurricane Andrew impact standards and carries no product approval rating for wind loads. The opening needs a full-frame impact-rated replacement door, not a storm door over a non-compliant unit. We’ll show you the compliant options that fit your home’s style and your budget on a free estimate.
Call TruePane Windows & Doors for Door Installation in Hobe Sound
When you’re ready to talk door installation in Hobe Sound, call Dale Kessler and the TruePane team at (772) 362-3326. We’ll answer the phone, walk you through the county’s permit requirements for your exact opening, and give you a free, line-item estimate with the product approval documentation baked in. A square deal, done right, and we stand behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.