Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Stuart
Door installation in Stuart runs between $1,850 and $6,800 for most entry doors, depending on whether you’re replacing a single hinged door on a 1970s CBS ranch or setting an arched custom unit on a St. Lucie River waterfront lot. Impact-rated options start around $2,900, and most standard jobs are completed in a single day once the door arrives. TruePane Windows & Doors has served Stuart homeowners for years, and we know exactly what this salt-air climate does to door frames, thresholds, and hardware. Call (772) 362-3326 for a free line-item estimate written on paper before we leave your driveway.
Why TruePane Windows & Doors Is Stuart’s Preferred Door Installation Company
Stuart homeowners remember the 2004 hurricane season better than most people remember their own birthdays. Frances hit in early September, and Jeanne followed three weeks later. That fall, nearly every house in the city scrambled for impact windows and doors, and a lot of those rushed installations are now quietly failing. We’re familiar with that inventory because we’ve replaced dozens of those exact doors in the last several years across Stuart, Jensen Beach, and Palm City. When you call our Door Installation team, you’re talking to a company that understands what a 2005-era impact door looks like when the flashing tape was skipped and the salt air found the gap.
TruePane Windows & Doors was founded by second-generation glazier Dale Kessler in 2008, and the shop rule he keeps on the whiteboard is the one we work by: if the pane is not true, the job is not done. A live person answers our phone 24 hours a day, seven days a week. Background-checked, uniformed technicians measure every opening twice and register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and every Stuart door job is covered by our Done Right Promise: if it is not done right, we make it right, with no paperwork fights and no arguing.
We are not new to Stuart. We know the difference between a CBS block wall in Poppleton Creek and a wood-frame addition off Cove Road, and we know that a door binding in July on the South Fork of the St. Lucie River is usually a moisture problem, not a hinge problem. That local knowledge shows up in every quote we write.
Our Door Installation Services in Stuart
We install and replace doors across Stuart’s housing stock, from 1950s concrete block ranch homes to newer waterfront construction. These are the door types we handle most often in this market.
Impact-Rated Entry & Swing Doors
Entry doors on Stuart homes take the full brunt of Atlantic wind-driven rain, and after Frances and Jeanne, the Florida Building Code stopped playing games with weak openings. A modern Impact Windows & Doors in Stuart impact-rated entry door runs $2,900 to $5,400 installed, depending on size, finish, and whether you choose a single door or a door with side lites. We recommend impact-rated units for any Stuart home, not only because of the hurricane corridor but because the laminated glass and reinforced frame hold up better against the estuarine salt air that chews through standard aluminum thresholds in under two decades. Most entry door replacements in Stuart are one-day jobs once the door arrives from the manufacturer.

Double & French Doors
Sliding & Patio Doors - Stuart installations alongside double and French doors are common on older coastal estates and on ranch homes opening onto screened patios and pool decks. A genuine French door installation here runs $4,200 to $7,800, with the higher end covering larger openings and true divided-lite glass on riverfront properties. These doors often fail first at the center meeting stile, where two panels join, and where salt air works into the weatherstripping channel. We set French doors with a slight reveal that lets the panels move independently through Stuart’s wet-dry seasonal swings, so you are not fighting a door that sticks in August and drafts in February.

Bifold & Folding Doors
Folding door systems are increasingly popular on Stuart homes where a Florida room or patio was enclosed after the 2004 retrofit and the homeowner now wants to open the wall back up. A single-run bifold installation starts around $6,500 and can pass $12,000 on wide waterfront openings requiring a structural header. These are not a weekend project. On Stuart’s older CBS homes, the existing header may not be sized for the new point loads, and we verify that before quoting anything. Flashing detail is everything on a folding door: get it wrong and you have water running into the wall cavity from the St. Lucie River’s daily humidity cycle.

Pivot Doors
Pivot doors are showing up in Stuart’s newer builds and in high-end renovations along the South Fork, especially on homes rebuilt after 2004 with larger, more architectural entries. A pivot door installation runs $5,500 to $11,000 in Stuart depending on slab weight, hardware spec, and whether the floor assembly needs modification. The pivot hinge carries enormous weight in a salt-air environment, so we spec stainless or marine-grade hardware and set the pivot point with a tolerance that accounts for slab movement. Dale Kessler has installed pivot doors heavy enough to require a two-man lift with a setting arm, and he treats every pivot install like a custom job, because it is one.

Storm Doors
Storm doors in Stuart serve a different purpose than they do up north. Here, they are an extra layer against wind-driven rain and a shield for a primary door that is not rated for impact. A quality storm door installed on a Stuart home runs $850 to $1,650, most of that in the door itself and the closer hardware. The salt air eats cheap storm door closers within a few years, so we use corrosion-resistant closers and set the threshold so water draining off the door has somewhere to go besides your entryway floor. For those seeking Energy-Efficient Windows in Stuart levels of protection, a storm door is the most affordable first step for a homeowner not ready to replace their entry door but wanting a little more protection this hurricane season.

Arched & Custom Doors
On Stuart’s waterfront parcels and in the older estate neighborhoods off St. Lucie Boulevard, arched openings and non-standard rough openings are common enough that we keep a dedicated custom-door fabricator on our approved vendor list. A custom arched door in Stuart runs $4,800 to $9,500, and the real cost driver is not the door itself but the rough opening modification and radius work. We measure every custom opening twice, create a template before quoting, and register both warranty layers in writing before the door is ordered. You will not get a surprise change order after the wall is open.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stuart
TruePane Windows & Doors is an authorized installer for more than a dozen manufacturer lines, and for Stuart’s climate we most often recommend PGT, CGI, ES Windows, and CWS for impact-rated doors. PGT’s WinGuard and CGI’s Sentinel lines are built in Florida for Florida wind loads, and ES Windows gives us a custom European-profile option when a homeowner wants something with a narrower sightline. ViewLux doors are another solid choice for Stuart’s mid-century ranch homes where the original opening is a non-standard size. Whatever brand you choose, you get a side-by-side, line-item quote on paper so you can see exactly what each line costs. We register both warranty layers, with durations stated, before the truck leaves your driveway.
Common Door Installation Problems We See in Stuart Homes
Stuart hands us a specific set of door problems. Here is what we encounter most often on the job.
- Salt-air corrosion on aluminum and steel components. The St. Lucie River estuary and Indian River Lagoon put more salt in the air than people expect, and it attacks door hardware, thresholds, and frame anchors. A door that was installed in 2006 may look fine on the exterior face but have anchors rusted through inside the jamb. We see this on nearly every door replacement on waterfront and near-waterfront lots.
- Flashing failures from the post-2004 retrofit rush. After Frances and Jeanne, crews installed thousands of impact doors in Stuart within a few months. A meaningful share of those installations skipped proper flashing tape at the sill and jamb intersections, and water has been working its way into the rough opening ever since. By the time a homeowner notices the baseboard stain or the musty smell, the jamb legs are often rotted in the CBS opening and the fix is a full door replacement, not a caulk repair.
- Non-compliant jalousie doors on older ranch homes. Especially in the Port Salerno and older Martin County communities surrounding Stuart, louvered jalousie doors and windows were the standard on 1960s and 1970s CBS homes. They have zero wind or water resistance and are explicitly prohibited as hurricane protection under the current Florida Building Code. Every time we replace one of these with an impact-rated French or swing door, the homeowner is surprised at how much quieter the house becomes.
- The 20-year replacement wave from 2004 retrofits. Stuart is unique in the concentration of impact doors installed in a two-year window after 2004. Those doors are now roughly two decades old: seals fail, laminated glass fogs, hardware wears past adjustment, and the drain systems clog with salt residue. We are in the middle of a second replacement wave, and the homes affected are concentrated in the same CBS ranch subdivisions that went through the first one.
Pricing for Door Installation in Stuart, FL
A standard entry door replacement in Stuart runs $1,850 to $3,600 for a basic steel or fiberglass unit, while impact-rated entry doors run $2,900 to $5,400. Double and French door installations range $4,200 to $7,800, bifold systems start around $6,500, pivot doors range $5,500 to $11,000, storm doors run $850 to $1,650, and custom arched doors land between $4,800 and $9,500. The factors that move the price most in Stuart are the door’s impact rating, the rough opening size, whether the existing frame is salvageable, and whether we’re pulling county permits with septic and well setback verification on acreage in unincorporated Martin County. Every quote is written line by line before work starts. Call (772) 362-3326 to schedule a free estimate. We’ll be there when we say, and the price we quote is the price you pay.
We Also Serve Cities Near Stuart
Our crews work throughout Martin County and the surrounding area. If you live in Jensen Beach, Palm City, Port Salerno, or Hobe Sound, the same TruePane door installation team that serves Door Installation in Stuart is available for your job, with the same Keystone Standard on every installation.
Serving Stuart, FL - Our Local Coverage Area
We’re based in the Stuart area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Stuart
Martin County requires verification that any new or enlarged door rough opening stays clear of your septic tank, drain field, and well setbacks before a permit is issued, and this matters when a homeowner wants to widen an opening, add a sidelite, or convert a window to a French door on acreage. If we do not check those setbacks before drawing the permit, you can end up with a plan revision, a stall, or a rework order after the wall is opened. We verify septic and well locations before we quote anything on unincorporated Martin County property, so the price you see on paper is the price that survives the permit review. Call (772) 362-3326 and we’ll scope your acreage opening the right way the first time.
No. Jalousie louvered doors and windows are explicitly prohibited as hurricane protection under the current Florida Building Code, and they provide effectively zero wind or water resistance in a storm. We still find them regularly on 1960s and 1970s CBS ranch homes around Stuart and Port Salerno, and every time we replace a set, the homeowner gets a quieter, better-sealed, code-compliant opening. A jalousie door replacement is one of the cheapest insurance upgrades a Stuart homeowner can make.
Stuart was hit directly by Hurricanes Frances and Jeanne within three weeks in September 2004, and the city went through a near-total impact-window and door retrofit in the following two years. Those 2004-2006 impact doors are now roughly 20 years old, which is the service life limit for door seals, laminated glass interlayers, and hardware in a salt-air climate. That means Stuart is currently in a concentrated second-replacement wave: thousands of doors installed in the same rush are reaching end of life at roughly the same time. If your home got impact doors after the 2004 storms, plan for replacement sooner rather than later.
Estuarine salt air from the St. Lucie River and Indian River Lagoon corrodes aluminum frames, sill pans, hardware, and weatherstripping significantly faster than coastal air in most Florida cities, because brackish water salt deposits are finer and more persistent. Exterior door hardware on waterfront Stuart lots commonly shows pitting and seized components within 8 to 12 years, and the internal anchor points can fail invisibly inside the jamb while the exterior face still looks fine. If your door is 15 or more years old and you are within a half mile of the water, get the frame inspected before it fails at the anchor.
Yes, in unincorporated Martin County. Doors on outbuildings, detached shops, and accessory dwelling units are governed by the same county permitting process as the main house, which means setback verification, occupancy classification, and wind-load requirements all apply. A door on a detached structure used for storage may need the same impact rating as a door on the primary residence, depending on the structure’s use and location on the lot. We handle the permitting classification for outbuildings and confirm what your specific structure requires before we quote, so there are no surprises during the permit review.
On a 1970s CBS Ranch Near Port Salerno
Our crew recently replaced a set of corroded aluminum jalousie doors with impact-rated French doors on a 1970s CBS ranch near Port Salerno, right on the edge of Stuart’s service area. The original louvered panels had zero wind or water resistance and were explicitly prohibited under the Florida Building Code. We pulled Martin County permits, confirmed septic and well setbacks on the acreage before cutting the new rough opening, and installed flashing tape and a fusion-welded frame to handle the estuarine salt air off the St. Lucie River. The homeowner’s main complaint was that the old doors rattled during every afternoon storm, and now the room is quiet enough that they notice the river instead of the wind.
If you need door installation in Stuart, call (772) 362-3326 to schedule your free estimate. A live person answers, and we’ll give you a written line-item quote on paper. Done right, the first time, with a 90-day promise behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After