Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Port St. Lucie
Window installation in Port St. Lucie runs $600-$1,400 per opening for standard impact-rated single or double hung units, and $1,200-$2,800 per opening for larger casement, picture, or sliding configurations, depending on frame material and the Florida Product Approval (FPA) rating. Most full-home replacements in the numbered GDC sections take two to four working days once materials clear the manufacturer. We schedule free estimates across Port St. Lucie every week, and a live person answers at (772) 362-3326 when you call.
Port St. Lucie is its own kind of market for window work. The housing stock is not like neighboring cities. It’s block after block of concrete block and stucco tract homes built by General Development Corporation, most of them still carrying the original aluminum single-pane windows from the 1980s and 90s. We know those frames. We know how they fail. And we know what insurers in St. Lucie County are asking for now when a policy comes up for renewal.
Our Window Installation crews work Port St. Lucie regularly, from Tradition and Torino down to the older section grids near Darwin Boulevard and along U.S. 1. When you call, you get a straight answer about what the job will take, what it will cost, and whether your existing windows carry an FPA number an insurer will accept.
Why TruePane Windows & Doors Is Port St. Lucie’s Preferred Window Installation Company
Dale Kessler founded TruePane in 2008 out of a specific frustration: too many window jobs were being set out of true, and too many homeowner warranties were rendered worthless by sloppy paperwork. We have spent the years since building a reputation around a simple rule that still governs every install: if the pane is not true, the job is not done. Port St. Lucie homeowners call us because we register both manufacturer warranty layers in writing before the truck leaves the driveway, and because our Done Right Promise is not fine print. If something is not right, we come back and make it right. No arguing.
The people answering our phone are local, not a call center. When a homeowner in the Torino district or over near Gatlin Boulevard calls about a puddle under a leaking slider, the person on the other end can talk specifics about Miami-Dade and Palm Beach County product approvals, about what a wind mitigation certificate requires, and about whether that old GDC frame is even worth re-glazing. That matters when you are pricing a job against a renewal deadline.
Our technicians are background-checked, uniformed, and trained the way a second-generation glazier tins an apprentice: measure twice, quote manufacturer lines side by side on paper, and never leave a homeowner guessing which product they are actually buying. We carry side-by-side quotes for Andersen, PGT, Marvin, Milgard, and a dozen other manufacturers. You see the frame, the glass package, the FPA number, and both warranty durations in writing before you sign anything.
We have been serving Port St. Lucie long enough to know that a live person answering at 2 a.m. is not a marketing line. During Frances and Jeanne in 2004, this county learned what happens when contractors disappear after a storm. TruePane plans to be in this town in thirty years, which is why we sponsor local county fairs and church roof funds, and why we hire apprentices from St. Lucie and train them into journeymen.
Our Window Installation Services in Port St. Lucie
Single & Double Hung Windows
Single and double hung windows are the default replacement in GDC-era CBS homes. The original units were builder-grade aluminum single-hungs, almost always single-pane, and almost always non-impact-rated. In Port St. Lucie, a typical double hung replacement in a standard 32-by-62-inch opening runs $700-$1,150 installed with an impact-rated vinyl or aluminum frame. Double hungs make sense here because the upper sash tilts in for cleaning, which matters when your windows face the Indian River Lagoon and pick up salt haze every dry season. We set the spring balances to hold in the humidity that makes cheap hardware bind by August.
Casement Windows
Casement windows crank outward and seal tight against the frame, which is why they remain a strong choice on the windward sides of Port St. Lucie homes. A standard impact casement runs $900-$1,800 per opening installed, depending on size and whether you choose a triple-pane glass package. The compression seal on a good casement closes flush, which cuts the air leakage that older GDC aluminum frames let through around the jamb. Homeowners in Tradition and St. Lucie West choose casements for corners and gable ends where prevailing southeast winds hit hardest.
Sliding Windows
Sliding windows are common on the back elevations of Port St. Lucie homes, especially in ranch plans where bedrooms face the backyard or the canal. A standard two-panel impact slider runs $800-$1,600 per opening. The original aluminum sliders from the 1980s had no interlocking meeting rails worth the name, and after forty years of salt air, the rollers are often seized inside corroded tracks. We replace the entire unit with a fusion-welded frame, not just the sash, because patching a corroded jamb wastes your money.
Fixed & Picture Windows
Fixed and picture windows are the least expensive glass per square foot, but in Port St. Lucie they often run larger than the standard replacement window, which pushes labor higher. Expect $600-$2,000 per picture window installed with impact glass, depending on whether the unit is a simple rectangle over a garden tub or a large living-room feature facing the golf course. The real decision is glass package and frame reinforcement. A big fixed unit facing east picks up the full morning sun and salt load, so we recommend Low-E coatings with a marine-grade frame rather than the builder default.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port St. Lucie
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT. For Port St. Lucie’s predominantly CBS housing stock, we regularly quote ES Windows for homeowners who want a marine-grade aluminum or vinyl fusion-welded frame without stepping into the highest Andersen price tier. We also work with ECO Window Systems when the priority is a strong FPA rating at a mid-range cost. Because we stock common components and maintain direct relationships with these manufacturers, turnaround on Port St. Lucie orders is measured in weeks, not months, even when a homeowner is trying to beat a Citizens Insurance non-renewal letter.
Common Window Installation Problems We See in Port St. Lucie Homes
- No FPA sticker, no renewal. Most GDC homes in the numbered sections north and south of Prima Vista Boulevard still carry their original single-pane aluminum windows. Those units predate post-Hurricane Andrew impact codes, and many have no Florida Product Approval number at all. When insurers run underwriting on a St. Lucie County policy, an undocumented window becomes a cancellation trigger. We replace those units with FPA-rated impact glass and provide the wind mitigation documentation your agent needs.
- Corroded jambs and seized sashes from salt air. Port St. Lucie sits between the Atlantic and the Indian River Lagoon. Salt-laden air works into aluminum tracks and jambs over decades until sashes will not slide and lock hardware crumbles. In the section off Darwin Boulevard, a 1987 CBS home we worked on had original sashes so corroded at the jamb that the frames had to be fully flashed and taped before the new ViewLux double-hungs could seat properly. That is a Port St. Lucie failure mode, not a generic one.
- HOA architectural review delays in master-planned communities. Newer neighborhoods like Tradition, Torino, and St. Lucie West enforce architectural standards that older sections never had. If an owner tries to self-perform a window swap without running the style and finish through the HOA’s architectural review board, the job can stall at the permit stage. We prepare the spec sheet, color, and frame profile documentation the review board actually asks for, so the permit does not die on a desk.
- Builder-grade glass that fails in the first decade. Newer construction in Port St. Lucie often uses a standard double-pane insulated unit that meets code but not much more. We see seal failures and fogging within eight to twelve years on homes that are barely past their first mortgage. The fix is a quality fusion-welded frame with a marine-rated low-E glass package, installed by a crew that measures the opening twice and registers the warranty properly.
Pricing for Window Installation in Port St. Lucie, FL
Window installation pricing in Port St. Lucie tracks the size, frame material, glass package, and FPA rating of the unit. On the low end, a standard single hung impact window in a GDC tract opening runs $600-$800. On the high end, a large casement or picture window with premium impact glass and a marine-grade frame can run $2,000-$2,800 per opening. A full home replacement in a typical three-bedroom, two-bath CBS ranch with 12 to 16 windows generally lands between $9,000 and $22,000, including tear-out, flashing, interior trim, and disposal. Labor rates in St. Lucie are somewhat lower than Palm Beach County to the south, but impact-glass material costs are the same everywhere in the wind-borne debris region.
What moves the number: whether the existing frame is corroded enough to require full flashing and jamb repair, whether the opening is oversized, and whether the HOA requires a specific frame color or profile that must be ordered rather than stocked. We give you a written, line-item quote before work starts, and that number is the number on the final bill. No change orders, no surprise line items. Call (772) 362-3326 and ask for a free estimate. We will walk the house, measure the openings, and quote Andersen, PGT, and ES Windows side by side on paper so you can see exactly what you are buying.
We Also Serve Cities Near Port St. Lucie
Beyond Port St. Lucie itself, our crews regularly work in Indiantown, White City, Fort Pierce South, and Jensen Beach. Each of those communities has its own housing stock and its own insurance review landscape, but the fundamentals of a true install do not change. If you are in a neighboring city and dealing with the same GDC-era window problem, call the same number and talk to the same local team.
Serving Port St. Lucie, FL - Our Local Coverage Area
We’re based in the Port St. Lucie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Port St. Lucie
Look for a Florida Product Approval number on the frame or sash, usually on a sticker or etched into the corner of the glass. If you don’t find one, your windows are almost certainly non-impact and will likely be flagged at next renewal, especially if your home is a GDC-era CBS product from the 1970s through the 1990s. We can inspect your windows, document which ones carry FPA numbers, and give you a written quote for replacement plus the wind mitigation certificate your agent needs. Call (772) 362-3326 to schedule that inspection.
Yes, in most Master-planned communities in Port St. Lucie, including Tradition, Torino, and some sections of St. Lucie West, the HOA requires architectural review before any exterior window change. We prepare the spec sheet, color, frame profile, and manufacturer documentation the review board asks for, and we pull the city permit. That sequence costs a little time up front, but it keeps your job from being flagged at final inspection or by the HOA’s compliance committee later.
St. Lucie County sits in the wind-borne debris region, and Port St. Lucie’s GDC housing stock is overwhelmingly equipped with original single-pane aluminum windows that have no Florida Product Approval numbers. After Frances and Jeanne in 2004, and with the ongoing property insurance crisis in Florida, carriers now run stricter underwriting on openings. An undocumented, non-impact window is a reason for non-renewal. The fix is documented FPA-rated impact glass installed by a licensed contractor who provides the wind mitigation certificate at completion.
An impact-rated window is built to withstand a missile impact test and then hold its envelope through repeated wind pressure cycles, and it carries a Florida Product Approval number proving it. A non-impact window is just a window. In St. Lucie County, non-impact windows will still keep rain out on a normal day, but they do not satisfy the wind-borne debris requirements insurers increasingly demand for coastal counties. Most Port St. Lucie homeowners choose impact-rated units because they also qualify for insurance premium credits a non-impact unit cannot offer.
Yes. Florida law requires carriers to offer windstorm mitigation discounts for documented, FPA-rated impact protection on openings. When we complete a window replacement in Port St. Lucie, we provide the wind mitigation inspection documentation and a certificate your agent can file. The discount varies by carrier and policy, but homeowners commonly see their Citizens or private carrier premium drop enough to offset a meaningful portion of the window cost over time. Call (772) 362-3326 for a free estimate, and we will walk you through what the documentation looks like.
Call TruePane Windows & Doors for Window Installation in Port St. Lucie
If your Port St. Lucie windows are original GDC aluminum, fogged, corroded, or missing an FPA number, the time to act is before your renewal notice arrives. We give straight answers, written quotes, and a Done Right Promise on every job. A live person answers 24/7 at (772) 362-3326. Schedule your free estimate today, and we will show you exactly what the job costs and exactly what you are buying.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port St. Lucie with honest window work and a straight warranty.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.