VLX 100 Pivot Door

VLX 100 Pivot Door in Port St. Lucie, FL | TruePane Windows & Doors

The VLX 100 Pivot Door is a heavy-duty aluminum entry system that rotates on a vertical center axis instead of swinging on side hinges. It’s the door people notice first when they walk up to a house. Oversized glass panels, clean sightlines, and a profile that feels more like a wall of light than a door. TruePane Windows & Doors is an authorized installation partner for ViewLux, which means we order directly from the manufacturer and install the VLX 100 to spec in homes across Port St. Lucie, Tradition, Torino, and St. Lucie West. If you’re pricing one for a new build or a remodel, call (772) 362-3326 and we’ll give you real numbers, not ranges you can’t act on.

Call (772) 362-3326

Product Overview - VLX 100 Pivot Door

The VLX 100 solves a problem that regular hinged doors can’t: it lets you go wide. A traditional door panel maxes out around 42 inches before the hinge load gets unwieldy. A pivot door rotates around a point set near the top and bottom of the panel, so the weight distributes vertically through the frame. That’s how you get a clean 60-inch-wide opening without sag, drag, or a floor track. The frame itself is aluminum, extruded to a 2.56-inch profile width with a wall thickness of 0.098 inches. That’s a stouter cross-section than most residential door systems in the Port St. Lucie market, and it’s why the VLX 100 handles a panel up to 60 inches wide by 120 inches tall without feeling like it’s fighting you when you push it open.

Architecturally, this door belongs in modern and contemporary homes: flat roofs, clean stucco walls, landscaped courtyards, pool entries. But we’ve also installed the VLX 100 on updated Mediterranean-style homes in St. Lucie West where the contrast between old-world tile and a minimalist pivot door is intentional. Buyers choose this series because it makes an entrance feel like an event. The door becomes the focal point of the facade. And because it’s aluminum, not wood, it won’t warp in Florida humidity or swell during the June-to-October rain season here on the Treasure Coast.

Technical Specifications

All six finish options are available across every glass configuration. The door ships as a complete system, pivot hardware included. TruePane Windows & Doors handles the full order entry with ViewLux, so you’re not guessing at product codes or line items.

Performance Features

Thermal Efficiency The VLX 100 frame carries a thermal break between the interior and exterior aluminum faces. That break interrupts heat transfer so the metal frame isn’t conducting Port St. Lucie’s August heat straight into your foyer. NFRC-rated performance means the numbers are independently tested, not manufacturer claims.

Acoustic Performance Laminated glass is the quiet option. The interlayer between glass panes dampens sound transmission, which matters if you’re on a busier street like Port St. Lucie Boulevard or near US-1. Even with standard insulated glass, the tight perimeter seal cuts down on wind whistle and ambient noise.

Airtightness & Weather Seal Every VLX 100 we install gets AAMA 812 low-expansion foam sealant around the full perimeter. That’s the difference between a door that closes and a door that seals. In Port St. Lucie’s humid climate, an unsealed opening leaks conditioned air and drives up your electric bill.

Waterproofing The pivot threshold and integrated sill system are designed to shed water away from the interior. During our installation, we slope the sill per AAMA 2400/2410 standards and run a water test after the frame is set to confirm drainage before the door panel goes in.

Wind Resistance The VLX 100 is wind-load rated for Florida coastal code requirements. St. Lucie County sits in a high-velocity hurricane zone, and the door system is engineered to handle those uplift and pressure ratings when ordered with impact-resistant laminated glass. That’s the configuration most Port St. Lucie homeowners need for code compliance.

Security & Hardware The pivot hardware rides on top and bottom pivot points rated for the full weight of a 60×120 panel plus glass. Multi-point locking is available, and the aluminum frame doesn’t flex under load. If someone tests the door with a shoulder, the door wins.

Color & Glass Options

Premium Black is the most requested finish we order for Port St. Lucie homes with white or gray stucco. It gives you that sharp, high-contrast modern look. Pure White disappears into lighter facades and feels airy from the curb. Anodized Silver reads as architectural aluminum, honest and industrial, and it hides Florida’s hard water spots better than any painted finish. Bronze and Champagne both carry a warm metallic tone: Bronze leans traditional Florida, Champagne skews contemporary with a subtle luxury tilt. Teak Wood is for homeowners who want the warmth of a wood entry without the maintenance. It’s a wood-grain finish over aluminum, so no rot, no termites, no repainting.

On glass, Clear is the default, but it puts your foyer on display from the street. Frosted and Obscure give you privacy while still letting light through, common for front entries on smaller lots. Low-E reflects solar heat, which cuts UV damage on your flooring and keeps the entry cooler. Tempered glass is a safety requirement for large door panels; it breaks into granules instead of shards. Laminated glass is the impact-rated option that meets St. Lucie County wind-borne debris code. We order most VLX 100 doors in Port St. Lucie with Low-E plus laminated impact glass.

Installation by TruePane Windows & Doors in Port St. Lucie

We’ve been installing doors and windows in Port St. Lucie long enough to know that a great door with a sloppy install is just an expensive problem. The VLX 100 is a precision system. The frame has to be set level, plumb, and square within tight tolerances, or the pivot operation binds and the panel drifts. We start every install with a pre-install inspection of the rough opening: stud condition, header load path, existing flashing, and any water damage from the old door. If the opening isn’t right, we fix it before the new frame goes in.

Once the frame is set, we run a full-perimeter AAMA 812 low-expansion foam seal. The foam expands to fill gaps without bowing the frame, then we cap it with a continuous exterior sealant joint. The sill gets sloped for drainage and shimmed dead level before the pivot hardware is mounted. We follow AAMA 2400/2410 installation standards from start to finish. After the panel hangs and the pivot points are adjusted, we run a water test with a controlled spray to confirm the perimeter is watertight. Then we clean up, walk you through the operation, and hand over the warranty paperwork.

Why does this matter in Port St. Lucie specifically? Because the local building department enforces Florida’s High Velocity Hurricane Zone codes, and inspectors here check door installations carefully. A door that’s not installed per AAMA standards can fail inspection, void the ViewLux warranty, and leak during our afternoon downpours. We’ve seen homeowner-installed pivot doors with stripped pivot plates and misaligned panels get red-tagged. That’s an expensive correction. For a door this size and weight, professional installation isn’t a suggestion. It’s the only way the product works as designed.

Frequently Asked Questions - VLX 100 Pivot Door

Get a Quote - VLX 100 Pivot Door in Port St. Lucie

The fastest way to get a real number on a VLX 100 Pivot Door is to call us at (772) 362-3326. We’ll ask a few questions about your rough opening, glass preference, and finish, then give you a written line-item quote with no change orders later. We also offer free on-site measurements for Port St. Lucie homeowners. If you’re ready to start the project, we’ll order your door and get it on the install calendar.

Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Port St. Lucie, FL and the Treasure Coast.