VLX 80 Awning Window

VLX 80 Awning Window in Port St. Lucie, FL | TruePane Windows & Doors

The VLX 80 Awning Window is a top-hinged aluminum window built for one thing Florida homeowners understand deeply: you want the breeze without the rain. Hinged at the top and opening outward from the bottom, it lets air flow through your Port St. Lucie home even during a passing afternoon shower. TruePane Windows & Doors is an authorized ViewLux installation partner, which means you get the full manufacturer warranty, installation done to code, and a local team that stands behind the work. Call (772) 362-3326 to talk through pricing and availability.

Call (772) 362-3326

Product Overview - VLX 80 Awning Window

The VLX 80 is built around a simple premise: a window should perform hard and look clean. The frame carries a 0.079-inch wall thickness, which gives it the rigidity aluminum is known for without the bulk. The overall profile measures 1.97 inches wide, so sightlines stay slim. That matters in Port St. Lucie, where a lot of ranch homes and newer builds lean on clean horizontal lines and wide glass. The awning configuration tucks neatly above kitchen sinks, along bathroom walls, and in hallway transoms where a crank-out window would crowd the space.

What sets this product apart is the thermal break. ViewLux engineered the VLX 80 to interrupt heat transfer through the frame, which is the weak point on older aluminum windows. That break means the interior frame surface stays closer to room temperature, reducing condensation and helping your AC hold its ground in a St. Lucie County summer. Buyers choose the VLX 80 when they want aluminum’s structural longevity and powder-coated finish options, but refuse to give up the energy performance usually associated with vinyl or wood. It’s a window that fits both modern concrete block homes and traditional Mediterranean-look houses in Port St. Lucie without shouting.

Because TruePane Windows & Doors installs the VLX 80, you’re not buying a window off a shelf and hoping someone knows how to flash it. We measure, order, install, and warrant the whole assembly. One call, one team, one accountable company.

Technical Specifications

Here’s what the VLX 80 brings on paper. These numbers translate directly into how the window will feel in your Port St. Lucie home.

• Frame material: Extruded aluminum with thermal break
• Wall thickness: 0.079 inches
• Profile width: 1.97 inches
• Operation: Top-hinged, outward-opening awning
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated (impact-rated option available)
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Performance compliance: NFRC-rated thermal performance, AAMA 2400/2410 installation standard, AAMA 812 perimeter sealant

Performance Features

Thermal Efficiency. The VLX 80’s thermal break separates the exterior and interior aluminum surfaces, cutting conductive heat transfer through the frame. Pair it with Low-E glass and you have a window that meets NFRC energy performance ratings and genuinely helps with cooling costs in Port St. Lucie’s nine-month summer.

Acoustic Performance. Aluminum frames with tight compression seals do more than block drafts; they reduce sound transmission. If you live near U.S. 1, Port St. Lucie Boulevard, or the Turnpike, laminated glass adds another meaningful layer of noise reduction inside the bedroom or home office.

Airtightness & Weather Seal. The VLX 80 uses multi-point compression weatherstripping around the sash perimeter. When the window closes, it pulls tight against the frame rather than just resting on a gasket. That means less humidity sneaking into the house, which matters in a coastal climate like ours.

Waterproofing. Awning windows naturally shed water because the sash slopes away from the opening. The VLX 80 adds weep chambers and drainage paths built into the frame, so water that hits the glass drains out and away. Installed per AAMA 2400/2410 standards with AAMA 812 foam sealant on every perimeter joint, it performs the way it was engineered to.

Wind Resistance. The 0.079-inch wall thickness isn’t a marketing number; it’s the difference between a window that holds its shape in a storm and one that flexes. The VLX 80 is wind-load rated for local code requirements in Port St. Lucie, and the laminated glass option adds impact resistance for homeowners who want hurricane-season peace of mind.

Security & Hardware. Awning windows are among the hardest configurations to pry open from outside because the hinge is at the top and the locking points are at the bottom, pulling the sash closed against the frame. The VLX 80 uses durable multi-point hardware that won’t loosen with repeated use.

Color & Glass Options

The VLX 80 comes in six finishes, and they’re all durable powder-coated or anodized surfaces that won’t fade under Port St. Lucie’s UV exposure. Premium Black is the current favorite for modern and coastal-contemporary homes with white stucco or gray exteriors. Pure White matches traditional Florida ranch homes and stays cooler to the touch. Anodized Silver has a raw, architectural aluminum look that suits mid-century-influenced designs. Bronze reads as warm but formal, a good pick for Tuscan or Mediterranean-style homes. Champagne is a softer metallic that bridges warm and cool palettes. Teak Wood offers a wood-look finish for homeowners who want warmth without the maintenance of real wood frames in a humid climate.

On glass: Clear is the baseline. Frosted works for bathrooms and street-facing windows where you want light but not a direct view. Low-E is the smart default in Port St. Lucie; it reflects heat back outside while letting visible light through. Tempered is safety-rated and required in specific locations by code. Laminated is the impact-resistant option, and it’s worth serious consideration if your home predates the stricter building codes adopted after Hurricane Andrew.

Installation by TruePane Windows & Doors in Port St. Lucie

An expensive window installed poorly is just an expensive leak. That’s not sales talk; it’s the reality of window replacement in a climate with 55 inches of rain a year and salt-laced air. We install the VLX 80 to the same standard every time, and we don’t cut corners.

Every project starts with a pre-installation inspection. We check the rough opening for rot, termite activity, out-of-square framing, and existing water damage before the new window ever leaves the truck. If there’s a problem, you hear about it before we set the window, not after. Then we remove the old unit, prepare the opening, and set the VLX 80 dead level, plumb, and square. That’s non-negotiable because an out-of-square aluminum frame will bind, leak air, and put stress on the glass. We apply AAMA 812 low-expansion foam sealant around every perimeter joint, flash the opening properly, and install interior sealing to stop air and moisture migration. The work complies with AAMA 2400/2410 installation standards, which is what ViewLux requires for the warranty to remain valid. Finally, we water-test the opening and walk the site with you to make sure cleanup is done right.

Port St. Lucie brings a few local considerations. Older homes may have single-story concrete block with wood-framed window bucks; newer builds are frame construction. Window replacement in concrete block requires different fastening and flashing than wood frame, and we’ve done both for years across Port St. Lucie, Tradition, Torino, and the C-24 corridor. The point is simple: a DIY install or a cut-rate crew can void your manufacturer warranty and leave you with a leak. Our workmanship is warrantied, and the product warranty stays intact because the installation is done by an authorized ViewLux partner.

Frequently Asked Questions - VLX 80 Awning Window

What is the lead time for the VLX 80 Awning Window? Most VLX 80 orders arrive at our Port St. Lucie shop within 3 to 4 weeks of order confirmation. Custom sizes, laminated glass, and specific finish combinations can push that to 5 or 6 weeks. We give you a written timeline before you commit, so there are no surprises. Call (772) 362-3326 to check current availability for your size.

Does the VLX 80 qualify for energy tax credits? The VLX 80 with Low-E glass and thermal break may qualify for federal energy efficiency tax credits if the specific configuration meets the current ENERGY STAR requirements for the Southern climate zone. We can tell you during your estimate whether your chosen glass package qualifies. Call (772) 362-3326 and we’ll walk you through it.

What warranty comes with the VLX 80 Awning Window? The VLX 80 carries ViewLux’s manufacturer warranty on the frame and glass, and TruePane Windows & Doors provides a separate workmanship warranty on the installation. The manufacturer warranty stays valid only when installation is performed by an authorized partner, which we are. We’ll give you the full warranty terms in writing before your project starts.

Can I customize the size of the VLX 80 Awning Window? Yes. The VLX 80 is manufactured to your rough opening dimensions, not pulled from stock. We measure every opening during the estimate, so the window is sized correctly on the first order, and you’re not paying for filler strips or re-work. Wide and short, tall and narrow, paired in a row: it’s built to your specs.

How do I maintain aluminum frames in Port St. Lucie? Aluminum frames need very little; wipe the tracks and frame with a mild soap and water solution two or three times a year, especially after heavy pollen or salt spray events. Keep the weep holes at the bottom of the frame clear so drainage works. The powder-coated finishes on the VLX 80 don’t need repainting like wood. Avoid abrasive cleaners or pressure washing directly into the weatherstripping.

Get a Quote - VLX 80 Awning Window in Port St. Lucie

If you’re replacing windows in Port St. Lucie and the VLX 80 is on your list, the next step is a free on-site measurement. We’ll bring samples, check your openings, and give you a written line-item quote with no change orders down the road. Call TruePane Windows & Doors at (772) 362-3326 to schedule your free estimate.

Written by the team at TruePane Windows & Doors, serving Port St. Lucie, FL, as a licensed and insured authorized ViewLux installation partner.