Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Roof Replacement & Installation in Port St. Lucie: What to Know First
Mr-Glass roof replacement and installation in Port St. Lucie typically runs between $650 and $1,400 for a standard skylight or roof glazing unit, depending on size, glass type, and framing condition. We complete most Mr-Glass roof work in a single visit, and we will tell you upfront if a repair extends the life of the unit instead of selling you a replacement you don’t need. This page is for homeowners who own Mr-Glass skylights, roof windows, or glazed roof panels and want the work done right the first time.
Call (772) 362-3326 and a live person answers, 24 hours a day. No phone tree, no callback form, no waiting for a regional dispatcher to route you around.
How Mr-Glass Products Fail - and How We Fix Them
After nearly two decades fitting and glazing windows and doors across St. Lucie County, we have seen the same Mr-Glass failure patterns repeat on rooftops from Tradition to Torino. Here is what actually happens and what we do about it.
- Perimeter seal failure on the Mr-Glass Solarium Series. The neoprene gasket that seats the glass against the aluminum curb degrades under Florida UV exposure faster than the glass itself. Water does not pour in on day one. It weeps, stains the drywall around the opening, and by the time you see it, the framing underneath has been wet for months. We remove the old gasket entirely, inspect the curb for rot or corrosion, and set the new glass on a fresh, properly bedded seal. We don’t caulk over the old gasket and call it fixed.
- Condensation between panes on Mr-Glass insulated roof units. When a Mr-Glass insulated glass unit loses its desiccant seal, Port St. Lucie humidity finds its way between the panes and fogs them from the inside. You cannot wipe it off and no retrofit coating clears it. The unit needs replacement. We measure the existing opening twice, order the replacement IGU to the exact size and glass spec, and register the new manufacturer warranty in writing before we leave the driveway.
- Flashing failures on Mr-Glass curb-mount skylights. The glass rarely fails first. The flashing does. Mr-Glass curb-mount units rely on step flashing lapped into the shingle or tile, and when an original installation cut corners on the flashing, Port St. Lucie afternoon thunderstorms find the gap within a season or two. We strip back the roofing around the curb, install proper step flashing and a continuous pan, and then re-set the unit. The roof replacement around the Mr-Glass unit is as important as the glazing work itself.
- Cracked or spider-webbed impact glass on Mr-Glass roof windows. Falling branches, a golf ball from the course, hurricane debris. Mr-Glass impact-rated roof windows can crack but hold their laminated layer, which is exactly what they are designed to do. The owner sees a shattered pattern and thinks the unit failed structurally. It has not, but it does need replacement before the next storm season. We handle the full replacement, matching the original glass type and maintaining the impact rating the homeowner paid for.
- Fogged or yellowed acrylic domes on older Mr-Glass roof vents. Some older Mr-Glass units were built with acrylic domes instead of glass. After ten to fifteen years, that acrylic hazes and yellows and lets in less light. You cannot polish it back to clarity. We replace it with a glass or high-clarity polycarbonate dome, and we check the framing while we are up there. Many of those old acrylic units sat on frames that were never properly flashed either.
Our Mr-Glass Roof Replacement & Installation Process
Here is how a Mr-Glass roof job goes when you call TruePane Windows & Doors.
- 1
You call (772) 362-3326. A live person answers, takes your address and a short description of what you are seeing. We schedule a visit at a time that works for you.
- 2
We inspect the unit and the roof around it. Our technician walks the roof, checks the glass, the seal, the flashing, and the framing underneath. We document what we find and show you the photo evidence before we recommend anything.
- 3
We lay out your options on paper. If OEM Mr-Glass parts are available and make sense, we price them. If a quality aftermarket IGU or flashing kit outperforms OEM at a better price, we tell you that too. You see the side-by-side numbers and decide.
- 4
We do the work. The old unit comes out, the curb gets inspected and rebuilt if needed, and the new unit goes in correctly. Measure twice, order once, everything after that is just following through.
- 5
We test and register the warranty. We water-test the installation, confirm the operation, and register both manufacturer warranty layers in writing. You get the paperwork before we leave.
- 6
The Done Right Promise starts. If something is not right, we come back and make it right. No arguing, no fine print, no paperwork fight.
What Mr-Glass Roof Replacement & Installation Costs in Port St. Lucie
Straight numbers, because that is what you want.
| Job Type | Typical Price Range in Port St. Lucie |
|---|---|
| Single Mr-Glass insulated glass unit replacement (small to medium) | $650-$950 |
| Large Mr-Glass Solarium Series panel replacement | $900-$1,400 |
| Full flashing rebuild + reglaze on curb-mount skylight | $800-$1,200 |
| Acrylic dome replacement with glass or polycarbonate | $550-$850 |
What moves the price: glass type (clear vs. impact-rated vs. low-E), access difficulty on steep or second-story roofs, framing repairs that only show up after the old unit is out, and whether the existing flashing can be salvaged. We quote a fixed price before work starts, and the price on the written estimate is the price on the bill. Seniors and veterans get a permanent 5% discount on every job. Call (772) 362-3326 for a free estimate with no obligation.
Why Port St. Lucie Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We are an independent Mr-Glass service provider, not a factory warranty center and not a franchise. That means two things. First, we are free to recommend the best fix for your roof, whether that is an OEM Mr-Glass part or a better aftermarket option. Second, our reputation in Port St. Lucie rests entirely on the work itself. Dale Kessler grew up in the Tradition area, trained at Indian River State College, and has spent the better part of two decades fitting and glazing windows and doors across St. Lucie County. If we do a roof job wrong, we see you at the grocery store.
Every Mr-Glass roof replacement and installation we do is backed by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. Our technicians are background-checked, uniformed, and trained to work in your home the way they would work in their own mother’s. And we are authorized installers for PGT, CGI, CWS, and ES Windows, which matters if your roof project expands into impact windows or doors. If the pane is not true, the job is not done. That is the rule, and it applies to every Mr-Glass unit we touch.
FAQs
Yes. We measure every opening twice and match the original glass thickness, tint, low-E coating, and impact rating where applicable. For Mr-Glass insulated units, we match the spacer width and gas fill so the replacement performs like the original.
It depends on the specific warranty language, which is why we read the warranty terms for you before any work begins. In many cases, glass replacement done by a qualified glazier does not void the remaining manufacturer warranty, but we will tell you in writing what the warranty says before you commit. Call (772) 362-3326 and we will walk through your specific unit.
Most single-unit replacements are completed in one visit, typically three to five hours from setup to cleanup. Flashing rebuilds or framing repairs can add time, and we tell you the schedule before we start. If it rains, we reschedule; we don’t rush a roof job.
If the glass is the only failed component and the frame and flashing are sound, a glass replacement usually makes sense. If the frame is rotting, the flashing is failing, or the unit is more than fifteen years old, replacement is often the better long-term money. We show you the evidence and the prices for both options, and you decide. Call (772) 362-3326 for an honest assessment, free of charge.
Most Mr-Glass glass replacement work does not require a permit, but structural changes to the curb, framing, or roof opening often do. We handle the permit process for any work that requires it, and we make sure the inspection passes before we consider the job done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Port St. Lucie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.