Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Stuart
Window replacement in Stuart, FL runs $850 to $2,900 per opening for most retrofit installations, with full-frame work and impact-rated units pushing higher on waterfront homes along the South Fork of the St. Lucie River. Those numbers reflect a market where the 2004 hurricane retrofit has aged into its second replacement cycle. If you live in Stuart, you’re likely looking at fogged glass, corroded aluminum frames, or wind ratings that no longer meet Florida Building Code. Call TruePane Windows & Doors at (772) 362-3326 for a straight answer and a free estimate. We’ve been working Martin County since 2008, and Dale Kessler runs every job under the same rule: if the pane is not true, the job is not done.
What does this mean, practically? Stuart sits at roughly 27°N in the Atlantic hurricane corridor. Design wind speed here is 140 to 150 mph. But the real daily enemy isn’t the hurricane. It’s the salt air off the brackish St. Lucie River and Indian River Lagoon, which corrodes jambs, sill pans, and hardware years before the glass itself fails. We see it in North River Shores, in the CBS ranches off US-1, and up along Monterey Road. That’s why local experience matters. A window spec that works in Orlando doesn’t survive five wet seasons on a Stuart waterfront lot. You need someone who sees those failures every week. That’s us.
Why TruePane Windows & Doors Is Stuart’s Preferred Window Replacement Company
We’re a second-generation glazier’s operation, founded by Dale Kessler in 2008, and we do things differently. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway. It’s called The Keystone Standard, and it’s the reason we can offer a Done Right Promise without flinching. If the install isn’t done right, we fix it. No paperwork fights. No arguing. That’s put in writing.
Stuart homeowners who call us get a live person. Not a voicemail tree, not a callback form. A person answers the phone 24 hours a day, 7 days a week. That matters when a seal fails in July and your living room suddenly has a two-inch fog line across the glass. Our technicians are background-checked and uniformed. They measure every opening twice, quote the manufacturer lines side by side on paper, and register both warranty layers before the truck leaves. We are authorized installers for more than a dozen lines, including, PGT, and CGI. The work is covered by a standing 5% discount for seniors and veterans, and we don’t play games with hidden line items.
If you’ve lived in your Stuart home for twenty years or more and plan to stay, you’re our customer. You remember the contractor who left a fogged seal and a door that binds in July. You’re not shopping for the cheapest bid. You’re shopping for the last call you’ll need to make. That’s how we build the quote, and that’s how we run the install.
Our Window Replacement Services in Stuart
We install, replace, and service windows across the full range of what Stuart’s housing stock demands. Some of the homes we walk into haven’t had a single opening touched since the original 1950s construction. Others got the 2004 retrofit and now need a second round on those exact same units. Here’s what we do:
Full Frame Replacement
When the original window frame is too far gone to hold a new unit, we pull it out, flash the rough opening to current code, and set a properly sized replacement. In Stuart, full-frame work comes up a lot on older CBS ranches where the stucco is solid but the aluminum frame underneath is corroded through. We see it constantly in neighborhoods off Kanner Highway and Colorado Avenue, where 1960s construction and estuary-driven salt air have done their work. Full-frame replacement runs $1,800 to $4,500 per opening depending on size, material, and whether the opening needs structural correction. You can read more about our Window Replacement process on the main service page.
Insert Window Replacement
If the existing frame is square and structurally sound, you don’t need full-frame work. We set a new insert unit inside the existing jamb. It’s faster, less invasive, and often the right call on 2004-era retrofit homes in Martin County where the frame itself is aluminum but still solid. Inserts run $850 to $1,900 per opening for standard sizes and mid-grade lines. The big variable is the condition of flashings and sealant, which is where salt exposure from the St. Lucie River shows up first.
Storm Window Replacement
Stuart’s code requirements mean any replacement window needs to handle wind-borne debris, not just wind speed. Storm windows in this market aren’t optional accessories. They’re the difference between a home that sheds water and a home that loses its roof during a direct hit. We replace and upgrade storm windows to impact-rated standards, with a design pressure of at least 150 mph on the waterfront tier. Those jobs run $1,600 to $3,800 per unit for large-format openings. The long-lead part isn’t the install. It’s the glass order, which is why we sequence the schedule around the manufacturer, not around our labor.
Energy-Efficient Upgrade
Replacing a single-pane jalousie or a failed 2004 impact unit with a properly rated double-pane insulated glass unit changes the house. Lower cooling bills from day one, and in Stuart’s wet-season humidity, the difference in condensation control is immediate. Energy-efficient upgrades typically run $1,200 to $2,600 per opening for mid-grade low-E units with argon fill. For older homes that still carry 1950s single-track sliders, the savings compound fast. ES Windows and ECO Window Systems are two lines we quote regularly for this exact scenario.
Historic Window Restoration
Stuart still has a stock of homes that predate the CBS boom, and some of those windows are architecturally worth saving. We do restoration work when the sash is sound and the frame is worth rebuilding: reglazing, hardware replacement, new weatherstripping, and historically accurate profiles. Historic restoration generally runs $900 to $2,200 per sash once the woodwork is assessed. If the frame is too far gone, we’ll tell you straight and quote a replacement that honors the original proportions. We’re not going to patch a sill that’s rotted through and call it a fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stuart
We are an authorized installer for more than a dozen manufacturer lines, and on any given Stuart job we’re quoting, ES Windows, and ECO Window Systems side by side on paper so you see the actual spec sheets, not a sales pitch summary. If you’ve looked at we can quote that line too. We keep local parts consolidation in mind for Stuart customers because the less time your order spends in freight, the less time you’re living with an open rough opening. Lead times on custom architectural glass and specialty millwork are the single biggest schedule variable for this market. We don’t sugarcoat that. We order early, confirm the lead time in writing, and then sequence the install around the delivery date, not the other way around.
Common Window Replacement Problems We See in Stuart Homes
- Seal failure in 20-year-old impact units from the Frances/Jeanne retrofit. Fogged glass, lost argon, and visible condensation between panes are the signature of an insulated glass unit (IGU) that’s reached the end of its service life. These aren’t repairable. The sash or the full IGU gets replaced, and we do that work weekly in Stuart’s older subdivisions.
- Salt-air corrosion of aluminum frames, sill pans, and hardware. On waterfront homes along the St. Lucie River and in neighborhoods near the Indian River Lagoon, brackish air eats through flashings and jamb seals in roughly half the normal lifespan. The glass itself might be fine. The frame holding it is not.
- Jalousie windows in Port Salerno and older CBS neighborhoods. These louvered-glass panels from the 1960s and 1970s offer essentially zero wind or water resistance. Under current Florida Building Code, they are explicitly prohibited as hurricane protection. They’re a high-volume replacement category here, far more common than in newer or inland Florida markets.
- Design wind speed compliance on non-impact openings. Stuart sits in a 140 to 150 mph design wind speed zone. Windows installed before the 2004 hurricanes, or retrofit units installed under older code cycles, may not meet current wind-borne debris requirements. That matters for insurance, for resale, and for surviving the next direct hit. We check the label and test report on every estimate, not just the frame dimensions.
Pricing for Window Replacement in Stuart, FL
Here’s where we put it in writing. Insert window replacement in Stuart runs $850 to $1,900 per opening for standard mid-grade lines. Full-frame replacement runs $1,800 to $4,500 per opening depending on size, material, and whether structural correction is needed. Impact-rated units for the waterfront tier run $1,600 to $3,800 per opening, and large-format architectural glass openings run higher, with the glass order itself being the long-lead variable. Historic sash restoration typically lands between $900 and $2,200 per sash after assessment.
What changes the number? Opening size. Condition of the rough framing. Whether you’re in an HOA or historic district. Impact-rated glass versus standard low-E. The manufacturer line you pick. We don’t work on hidden change orders. The price is fixed in writing before we order anything, and the order doesn’t go in until you’ve approved it. For an exact quote on your Stuart home, call (772) 362-3326. The estimate is free, and we’ll give you the number on paper, not over a slide deck.
We Also Serve Cities Near Stuart
Our crews handle Window Replacement in Stuart full-time, and we run the same service into Jensen Beach, Palm City, Port Salerno, and Hobe Sound. The salt-air and code environment is the same Martin County profile, and so are the homes. If you live in any of those flood-zone or estuary-adjacent neighborhoods, call the same number: (772) 362-3326. A live person answers 24/7.
Serving Stuart, FL - Our Local Coverage Area
We’re based in the Stuart area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Stuart
Many of them are, and not because they were bad windows. The insulated glass units from the 2004 to 2006 retrofit wave are now roughly 20 years old, which is the point where seal failure and argon loss become statistically common. If you’re seeing fog between the panes or the glass has that oily, rainbow sheen, the IGU is done. The frame might still be serviceable, which means a sash or IGU replacement rather than a full tear-out. Call (772) 362-3326 and we’ll tell you which one you need based on the unit’s label and manufacture date, not a guess.
Port Salerno’s 1960s and 1970s CBS housing stock was built with jalousie windows because they were cheap, and because they ventilated well in the pre-central-air era. They were never a serious wind or water barrier, and under the current Florida Building Code they are explicitly prohibited as hurricane protection. Yes, they can be replaced with impact-rated windows. We do that conversion regularly in Port Salerno and the older CBS neighborhoods of Stuart. The process is a full-frame replacement with proper flashing and a 150 mph design pressure rating. It’s not a handyman patch job, and it changes the house permanently.
The St. Lucie River is brackish water, and its estuary air is corrosive in a way that open-ocean salt air from the beach isn’t. Aluminum frames, sill pans, hardware, and weatherstripping in Stuart waterfront homes degrade roughly twice as fast as the same materials in inland Florida, and faster even than in coastal cities farther from brackish waterways. The result is that the frame fails while the glass is still intact, which is why we always check frame condition before recommending a repair. In many cases, the right call is a full-frame replacement, not an insert. Call (772) 362-3326 for an assessment and an honest recommendation.
Stuart sits in a 140 to 150 mph design wind speed zone under the current Florida Building Code. Replacement windows here need to be impact-rated or protected by shutters that meet wind-borne debris requirements. We quote and install impact-rated units as the default for full replacements, because relying on shutters means relying on someone being home to close them when a storm turns. If you want to know whether your current windows meet the rating, check the label. If there’s no label, the window was likely installed before the current code cycle, and it’s worth having us look. Estimates are free, and we’ll tell you what the label says.
By ordering early and sequencing everything around the glass delivery, not around our labor schedule. Custom architectural glass and specialty millwork for Stuart’s high-end estates run on manufacturer lead times that are often eight to sixteen weeks, depending on the line and the spec. We never start a project by tearing out the old windows and leaving you with plywood for months. We confirm the lead time in writing, lock the price before ordering, and schedule the install to coincide with delivery. That’s a discipline built into The Keystone Standard. If you’re planning replacement windows for a waterfront home or anything custom, call (772) 362-3326 as early in the process as you can, and we’ll sequence the schedule so you’re not living in an unfinished hole through the wet season.
Window replacement in Stuart runs slightly higher than inland Martin County towns due to the combination of impact requirements and salt-air corrosion prevention. You’re not paying for a fancier truck. You’re paying for flashings, sealants, and hardware that survive a brackish estuary environment, plus the engineering review that custom waterfront openings require. Insert jobs lower than $850 per opening in Stuart are typically not code-compliant impact units, and we’d caution you to check the label before signing. An exact quote for your house, in writing, is a free phone call away: (772) 362-3326.
Yes. We pull the permits before work starts, and we schedule inspections once the install is complete. For window replacement in Stuart, permit requirements are consistent across the city and unincorporated Martin County, though some historic districts add an additional review layer. We handle that paperwork so you don’t have to chase down a county inspector. It’s part of how we keep the Done Right Promise meaningful. When the inspector signs off, the job is done.
One more thing worth saying plainly. We recently replaced a wall of original 1960s jalousie windows in a Port Salerno CBS ranch with custom impact-rated casements and fixed architectural glass units. The aluminum frames had corroded from decades of St. Lucie River salt air, and the louvered glass offered zero wind protection. We pulled full-frame, flashed the rough openings to current code at 150 mph design pressure, and coordinated the long-lead Marvin order so the homeowners weren’t living with plywood for months. That’s what the second-replacement wave looks like here in Martin County, and it’s the work we do every week in Stuart.
If you’re looking at your windows and seeing fog, corrosion, or gaps that weren’t there last season, call us. A live person answers (772) 362-3326, 24 hours a day, 7 days a week. We’ll schedule a free estimate, measure twice, and give you a written quote with both warranty layers registered before the truck leaves your driveway. That’s the Keystone Standard, and it’s the reason we say the same thing after every install: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Stuart and Martin County since 2008 through a heritage of craft and community commitment.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.