Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Sewall’s Point
Door installation in Sewall’s Point is not a slab-swap job. It’s a full-frame, marine-hardware, impact-rated discipline, because this peninsula sits in 360-degree salt-air exposure from the St. Lucie River and Indian River Lagoon, and every permitted opening falls under Florida’s Wind-Borne Debris Region code. We’ve worked on homes from South Sewall’s Point Road to the lagoon-side estates, and we know what Martin County inspectors flag before the permit is even pulled. If you need a door that closes true in July and still opens after a storm, call (772) 362-3326 for a free estimate.
Every home on the island, not just the waterfront lots, absorbs ambient salt air that seizes standard aluminum hardware within a few years. That single fact changes what we specify, how we order, and why we register both warranty layers in writing before the truck leaves your driveway. We’re Door Installation specialists who plan for the peninsula, not for a generic Florida jobsite.
Why TruePane Windows & Doors Is Sewall’s Point’s Preferred Door Installation Company
Dale Kessler founded TruePane Windows & Doors in 2008 on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That standard matters more on Sewall’s Point than almost anywhere else in Martin County, because a door that binds in July or a lock that seizes after eighteen months is not a minor annoyance here. It’s a predictable failure caused by the peninsula’s salt-air saturation, and it’s exactly what we design against.
Our crews work in Sewall’s Point regularly, and we know the housing stock: mid-century waterfront estates from the 1950s and 1960s, newer luxury custom builds, and very little commercial inventory. That means our technicians understand what an original single-pane aluminum slider looks like after sixty years of lagoon exposure, and how a 1968 jamb corrodes differently than a 2015 one. Dispatch and scheduling run from our South FL office, but the crews serving Sewall’s Point are local, background-checked, and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper. And they register both warranty layers before they leave the driveway, no arguing.
We’ve been at this since 2008 through the Kessler family trade. The Done Right Promise means if the work isn’t right, we make it right, in writing, without a paperwork fight. That’s why homeowners who’ve been here twenty years and plan to stay another twenty call us when a door needs replacing.
Our Door Installation Services in Sewall’s Point
Entry & Swing Doors
A front door on Sewall’s Point does more than welcome guests. It’s the first line of defense against wind-borne debris during hurricane season and the first component to show salt-air corrosion if the hardware isn’t marine-grade. We install entry and swing doors with stainless or coated hardware, full-frame when the existing jamb has oxidized, and impact-rated glass where code requires it. A typical entry door replacement in Sewall’s Point runs $2,800 to $6,500 depending on the slab, the frame condition, and the hardware spec.
Pivot Doors
Pivot doors are common on the newer custom builds along the lagoon side, and they’re a different animal from a hinged door. The pivot mechanism carries the full weight of the slab, so any settling or racking from salt-air frame movement gets amplified. We order pivot doors with the hinge hardware specified for marine exposure, and we tell homeowners the honest truth: a custom pivot door on Sewall’s Point is a 10 to 14 week lead-time item, not a two-week order. Prices for a custom pivot door installation here typically run $12,000 to $30,000, driven by slab size, glass spec, and hardware.
Double & French Doors
Double and French doors on the peninsula need a level of frame reinforcement that’s easy to skip if the crew is in a hurry. We’re not. The meeting stile, the astragal, the multi-point lock alignment, the threshold seal: every one of these gets checked against the salt-air reality of Sewall’s Point, where a small gap at the sill becomes a corrosion point within a season. Expect $5,500 to $14,000 for a full-frame French door replacement with impact glazing, depending on width and hardware.
Arched & Custom Doors
Older Sewall’s Point homes often have arched openings that don’t fit a stock slab from a supply yard. We handle arched and custom doors as true custom work: field-measured, drawn, and ordered to spec with the manufacturer’s marine-grade hardware option. Marcasite, mahogany, architectural glass, custom transoms, we’ve done them all on this island. Custom arched entry systems here start around $9,000 and can exceed $25,000 for true architectural glass and custom millwork, and the lead time is real. Plan for 12 weeks, sometimes longer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sewall’s Point
We’re an authorized installer for more than a dozen manufacturer lines, and for Sewall’s Point specifically we lean on the brands that build for coastal Florida: Andersen, PGT, and ES Windows are the ones we specify most often here, though we also work with Marvin, Milgard, CGI, and Eco Window Systems when the homeowner or architect has a preference. We quote lines side by side on paper, so you see exactly what you’re buying, and we order with marine-grade hardware as the default. No upcharge to get the right spec, because on this peninsula the wrong hardware is a callback waiting to happen.
Common Door Installation Problems We See in Sewall’s Point Homes
- Impact-rated doors with non-marine-grade hardware seizing within 18 to 24 months. The glass is fine. The lock isn’t. The peninsula’s ambient salt air gets into the multi-point mechanism and the handle starts binding. We replace the hardware with marine-grade coated components and the problem doesn’t return.
- Full-frame replacements ordered without accounting for 10-to-14-week lead times on custom mahogany or architectural glass doors. Homeowners call us mid-remodel expecting a custom pivot door in three weeks. It doesn’t work that way, and we say so before the deposit is taken. Lead time, not labor, sets the calendar on this tier.
- Installing a non-impact door on any opening during a permitted renovation, even a minor one. Martin County’s current FBC enforcement means an inspector can flag that opening and hold the whole remodel until it’s brought up to impact code. We’ve seen a kitchen remodel stall for six weeks on this exact issue.
- Older mid-century frames that look fine from the outside but have oxidized jamb legs and corroded anchor points behind the trim. The door comes out and the jamb crumbles. We always plan for full-frame replacement on pre-1980 homes on the island, and we price it that way up front so there’s no surprise line item.
On South Sewall’s Point Road, we replaced a 1968 mid-century waterfront home’s original single-pane aluminum sliding door with a custom Andersen impact-rated unit. The old jamb had corroded so badly that the multi-point lock mechanism had seized, and the homeowner’s renovation permit for a kitchen remodel triggered an inspector’s flag requiring the shutter-only opening to be upgraded to full impact glazing before the project could close. That’s the job here: not swapping a slab, but unwinding sixty years of salt-air history from the rough opening.
Pricing for Door Installation in Sewall’s Point, FL
Entry and swing doors in Sewall’s Point typically run $2,800 to $6,500. French and double doors land between $5,500 and $14,000. Custom pivot doors start around $12,000 and go up from there, and arched or architectural custom doors range from $9,000 to $25,000-plus depending on the glass and millwork. Storm doors are the most approachable at $800 to $2,200 installed. What moves the number: full-frame versus slab-only, impact glass requirement, marine-grade hardware, and custom sizing. The price we give you on paper is the price on the bill. No change orders on a properly measured job. Call (772) 362-3326 for a free, written, line-item estimate.
We Also Serve Cities Near Sewall’s Point
TruePane Windows & Doors serves the whole Treasure Coast corridor. We handle door installation across Sewall’s Point and the surrounding communities, including Port St. Lucie, Indiantown, White City, and Fort Pierce South. If you’re in one of those areas and dealing with the same salt-air and code issues, call the same number: (772) 362-3326.
Serving Sewall’s Point, FL - Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Sewall’s Point
Sewall’s Point is a small peninsula entirely encircled by the St. Lucie River and the Indian River Lagoon. That means every home on the island sits in full marine salt-air exposure from all directions, not just the waterfront lots. The salt is ambient, constant, and directional from no single source. Standard aluminum frames oxidize at the corners, weep holes clog, and multi-point lock mechanisms seize within a few years. Even a mile inland in Stuart, the salt exposure is directional and the failure pattern is slower. Call (772) 362-3326 for a free estimate and we’ll explain the right hardware spec for your opening.
You can, until you pull a permit. Sewall’s Point falls squarely within Florida’s Wind-Borne Debris Region, and Martin County’s current FBC enforcement means any renovation permit, even for an unrelated trade like a kitchen remodel, can trigger an inspector flag requiring shutter-only openings to be upgraded to full impact glazing before the project closes. We’ve seen remodels stall at final inspection on this exact issue. If you’re planning any permitted work, check the doors first. Call (772) 362-3326 and we’ll tell you what the inspector will see before you start.
A true custom pivot door on Sewall’s Point is not a stocked item. The slab is built to your exact rough opening, the pivot hardware is specified for marine exposure, and the glass package is usually impact-rated laminated. That combination runs 10 to 14 weeks from approved shop drawings to delivery, and architectural glass or custom millwork can push it to 16. The lead time is set by the manufacturer, not by labor. We tell you the real calendar before you sign, and the price is fixed in writing before anything is ordered. Call (772) 362-3326 to start the process with an honest timeline.
On most pre-1980 homes on the peninsula, you need a full-frame replacement. The jamb legs on those original aluminum frames have been absorbing salt air for fifty or sixty years, and once the old door comes out, the jamb is often too oxidized to hold a new slab securely. We plan for full-frame on every mid-century home on the island, and we price it that way up front so there’s no surprise line item. A full-frame replacement also gives us the chance to square the rough opening before the new door goes in. Call (772) 362-3326 for a free estimate. We’ll tell you exactly what you’re looking at before we touch anything.
Impact-rated doors on Sewall’s Point use laminated glass: two panes of glass bonded to a clear plastic interlayer, usually with a heavy-duty framing system rated for the Wind-Borne Debris Region. The laminate holds the glass together even when a storm-driven object hits it, so the opening stays sealed. We specify laminated impact glass from manufacturers like Andersen, PGT, and ES Windows, with the marine-grade hardware option as the default on this island. Call (772) 362-3326 for a free estimate and we’ll quote the exact glass package for your door.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sewall’s Point and the Treasure Coast with door installation done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.