ES Windows Custom & Geometric Windows Nationwide | TruePane Windows & Doors

ES Windows Custom & Geometric Windows in Port St. Lucie: What to Know First

We provide independent ES Windows custom and geometric window service in Port St. Lucie, and most jobs are quoted and completed within one to two weeks depending on glass lead time. You’ll get a written line-item estimate before any work starts, and the price we quote is the price you pay. If you own ES Windows with an arch, radius, trapezoid, or oversized opening and something is not right, call (772) 362-3326 and a live person will answer.

Call (772) 362-3326

This page is for homeowners in Port St. Lucie who bought or inherited ES Windows and now need them repaired, reglazed, or replaced. We are an independent ES Windows service provider, not a factory-authorized dealer. That matters because we have no incentive to steer you toward a new window when the old one can be saved. Our job is to look at what you have, tell you straight what it needs, and do the work so it stays right.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a well-regarded aluminum frame line, and in Port St. Lucie’s salt air and summer humidity, their custom shapes hold up better than most vinyl. But every brand has failure patterns, and after years of opening up ES Windows across St. Lucie County, here is what we see and what we do about it.

• Radius and arch units fogging at the apex. On ES Windows curved-top and eyebrow units, the flexible spacer where the glass meets the radius is the first thing to fail. Port St. Lucie’s morning humidity works against the seal until moisture gets in and fogs the top arc. We pull the sash, order a replacement insulated glass unit cut to the exact radius from our glass supplier, and reset it with fresh sealant. You get a clear lite that matches the rest of the window.
• Aluminum frame corrosion at corner welds. The ES Windows aluminum frame is powder-coated, but on coastal-facing elevations in Port St. Lucie, micro-scratches from installation let salt air reach the raw aluminum. Corner joints start to oxidize and the closed-cell foam inside can break down. When we see this, we clean the joint, treat the corrosion, and reseal with marine-grade sealant before it spreads. If the frame is too far gone, we say so and recommend replacement rather than patching a frame that will fail again.
• Geometric sash sagging on fixed trapezoids. Large fixed geometric units, especially triangles and trapezoids over two feet on the short side, can sag if the original install did not support the apex. The glass then puts uneven pressure on the frame and the seal starts to separate at the top point. We remove the unit, check the rough opening for proper blocking, add structural support where it is missing, and reset the window plumb and true.
• Sticking or binding casement crank assemblies. On ES Windows casement and awning units, the crank gears and hinge arms wear faster in coastal air. Homeowners tell us the crank gets harder to turn each season until it locks up completely. We replace the crank and hinge assembly with OEM parts where available, or a quality aftermarket equivalent when the original part is discontinued. The window opens like it should, and we set the tension so it does not bind in the summer heat.
• Failed glazing tape on direct-glaze fixed units. ES Windows uses structural glazing tape on many fixed and geometric units. After ten to fifteen years in Florida sun, that tape can lose adhesion and let water weep behind the frame. The first sign is usually a soft drywall stain below the window. We pull the lite, strip the old tape, and reglaze with a two-part structural silicone rated for high-UV exposure. This is a job you do not want a handyman attempting on a second-story unit.

Our ES Windows Custom & Geometric Windows Process

Measure twice, order once, everything after that is just following through. Here is what happens when you call us about an ES Windows custom or geometric unit.

1. 1
   You call (772) 362-3326. A live person answers, takes your address and a description of the window, and schedules a time. No voicemail tree, no callback form.
2. 2
   We measure and diagnose. A background-checked technician arrives in uniform, measures the opening twice, and inspects the frame, glass, seal, and hardware. We write down what we find in plain English.
3. 3
   You get a written quote. Before any work is approved, you see the line items. OEM parts if available, aftermarket if that is the better value, and we tell you which is which on the paper.
4. 4
   We order and build. For custom glass, we order the insulated unit cut to your exact dimensions and radius from our glass supplier. Most Port St. Lucie jobs are ready to install within five to ten business days.
5. 5
   We install and test. The technician sets the unit plumb and true, seals it properly, and tests operation before leaving. Then both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves your driveway.
6. 6
   You are covered. Every ES Windows job carries our Done Right Promise. If it is not right, we make it right. No paperwork fights, no arguing.

What ES Windows Custom & Geometric Windows Costs in Port St. Lucie

ES Windows glass replacement in Port St. Lucie runs between $220 and $480 per lite for standard rectangular units, and $380 to $750 per lite for radius, arch, and geometric shapes because the glass has to be cut and sealed to a specific template. Hardware repair runs $95 to $260 depending on the part. Full replacement of a custom geometric unit starts around $900 and goes up based on size, glass package, and whether it is impact-rated.

What moves the price is the shape itself. A simple arch costs less than a true ellipse or a five-sided trapezoid because the glass supplier charges more for complex radii and angles. Impact-rated custom shapes add cost but are worth it in Port St. Lucie where hurricane code matters. Call (772) 362-3326 and we will give you a written estimate for your exact window. Estimates are free, and the quote does not change once you approve it.

Why Port St. Lucie Homeowners Call TruePane Windows & Doors for ES Windows Work

We have served St. Lucie County since 2008, and Dale Kessler grew up in the Tradition area of Port St. Lucie watching his father rehang doors and reseal windows for neighbors on weekends. That is the company we run. We are also an authorized installer for more than a dozen manufacturers, including PGT, CGI, CWS, and ECO Window Systems, so if a repair turns into a replacement, we can quote several lines side by side on paper and you decide what makes sense for your house and budget.

Every ES Windows job we take on is covered by our Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway. If the pane is not true, the job is not done. That has been the rule since day one.

FAQs